HomeDescriptions of Functions / Utility KeysCentering (Duplex 2nd Side)

Centering (Duplex 2nd Side)

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Printer Adjustment]
            • [Centering (Duplex 2nd Side)]

Adjust the print start position at the left edge of the paper relative to the paper discharge direction for printing the back side in 2-sided printing.

Press the Start key to print a test pattern. Check the test pattern, then, if necessary, repeatedly adjust so that the margin between the left edge and the print starting position is 3/16 inches (4.2 mm) ( 1/32 inches ( 0.5 mm)).

Settings

Description

[Select Tray]

Select a paper tray that is used to adjust the start position for printing.

[Adjust Value]

Enter an adjustment value between -5.0 and 5.0 mm by tapping [-] and [+].

The following shows the default settings.

  • Tray1: [0.0 mm]

  • Tray2: [0.0 mm]

  • Tray3: [0.0 mm]

  • Tray4: [0.0 mm]

  • Bypass Tray: [0.0 mm]

  • Only the plain paper of 8-1/2 11(A4) can be used for adjusting the Bypass Tray.