Printer P: Change the Information

You can change the information of the saved printer profile.

1. Click [Printer Profile] on [Profile Management] screen.

   • Similar operation can be done by selecting, on the [File] menu, [Profile Type] - [Printer Profile].

2. From the tree view and the list, select the printer profile to change the information.

   • For details about how to connect another controller, refer to Switching the Connection Destination.

   • When you reload the information of the image controller connected currently, select [File] menu - [Reload].

3. Click [Change Table Information].

   The [Change Table Information] screen is displayed.

   • When you select the multiple printer profiles, [Change Table Information] is not available.

   • Similar operation can be done when you select [File] menu - [Change Table Information].

   • If the profile has an asterisk (*) in its name, you can change only its paper type link.
     If the profile has an at sign (@) in its name, you can change only its paper type link and its memo.

4. If necessary, enter [Saved Name].
   Up to 31 one-byte characters can be used.

   • You cannot save the printer profile of the same name with those in the image controller.

5. Select [Paper Type Link], as required.

6. If necessary, enter [Memo].
   You can enter up to 64 one-byte characters (32 two-byte characters).

7. Click [OK].

   The printer profile information is changed.