Registering Copy Job Setting
Follow the procedure below to store the copy job setting.
Available settings: [Paper Setting], [Original Setting], [Zoom Setting], [Color/Print Side], [Quality Adjustment], [Output Setting], [Application]
Stored job is given a job number (from 01 to 30) and alphabetical name.
Up to 30 jobs can be registered.
Press the [COPY] tab to display the [COPY] screen.
Make copy selections, as desired.
Press Mode Memory on the control panel.
The [Mode Memory Mode] screen is displayed.
Press [Store].
The screen to check the details is displayed.
Review the settings to be stored.
Depending on the settings, [
][
] are displayed at the bottom of the screen. Press the keys to check the setting.
If any setting change is desired, press [Cancel] on the screen to check the details and then press [Cancel] on the [Mode Memory Mode] screen. The screen returns to the [COPY] screen. Make correction of the settings.
Press [OK].
The [Job store mode] screen is displayed.
Press the desired job key, then press [OK].
The [Job Name Setting] screen is displayed.
A key without name indicates that no job is stored under that job number.
A named key without a lock icon
has been stored with job settings but can be overwritten.
The key with the lock icon
is locked and cannot be selected. To enable or disable the lock mode, select [Lock/Delete Mode Memory] - [Copy Mode Memory]. For details, refer to Copy Mode Memory: Locking and Deleting Copy Mode Memory.
Enter a job name, then press [OK].
Up to 8 two-byte characters or 16 one-byte characters can be entered for the job name.
To return to the [Mode Memory Mode] screen, press [OK]. Check that the job name has been correctly entered.
Text entry is described in Inputting Characters.
Make sure that you enter a name for the job. You cannot return to the [Mode Memory Mode] screen even when pressing [OK] without entering a name for the job.
Press [OK] on the [Mode Memory Mode] screen.
The screen returns to the [COPY] screen.