Using a Computer to Print a Hold Job

You can print a hold job using Job Centro.

1. Start Job Centro and log in to the machine. (Refer to Starting Job Centro.)

   The [Job Centro] screen is displayed.

2. Click the [Hold Job] tab and select the job to be print.

   • [Job Type] display
     [Print]: Print job held from the printer driver
     [Copy]: Copy job or scan job held from the control panel of the main body

   • It is possible to select multiple jobs.

3. Click [Print].

   • You can alternately click [Hold Job] - [Print] in the [Job Operations] menu.

4. Select [Print Mode] on the [Print] screen, enter [Number of Copies], then click [OK].

   • [Normal]: Prints data by the number of sets that is specified for the job.

   • [Proof]: Prints data by only one set to check the output.

   • [Proof (1st Sheet)]: Prints only the first page to check the output.

   • [Wait]: Sets the job to the output stop state as a reserved job.

   

   To delete the job at the time of outputting, add a check mark to [With Job Delete].

   • If multiple jobs are selected in step 2, data is printed by one set. The number of copies cannot be specified.

   

   • To delete the job at the time of outputting, add a check mark to [With Job Delete].

   The specified job is output.