Finisher FS-612

Type

Multi-folding and multi-stapling equipment

Function

Non-Sort

Outputs non-offset sets to the primary (main) tray.

Offset Sort / Offset Group

Offsets each set, and outputs it to the primary (main) tray.

Secondary (sub) tray

Outputs non-offset sets to the secondary (sub) tray.

Staple

Outputs stapled sets to the primary (main) tray.

Fold&Staple

Outputs saddle-stitched and half-folded sets to the fold/staple mode tray.

Half-Fold

Outputs half-folded paper to the fold/staple mode tray.

Tri-Fold-In

Outputs tri-folded paper to the fold/staple mode tray.

Punch

Outputs punched paper to the primary (main) tray or secondary (sub) tray. Punch Kit PK-512 or Punch Kit PK-513 needs to be mounted.

Post Inserter

Feeds paper from the PI tray. Post Inserter PI-502 needs to be mounted.

Staple mode

3 positions (1 staple at front/rear corner, 2 staples in center)

Available sizes in the primary (main) tray (Staple)

Standard: A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed/long edge feed, B5 short edge feed/long edge feed, A5 long edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed/long edge feed, 7.25 10.5 short edge feed/long edge feed, 5.5 8.5 long edge feed, 9 11 long edge feed, Foolscap*, 8K short edge feed, 16K short edge feed/long edge feed

Custom: Widthwise 182 mm to 314 mm, Lengthwise 139 mm to 458 mm / Widthwise 7.17" to 12.36", Lengthwise 5.47" to 18.03"

Tab paper: A4T long edge feed, 8.5 11T long edge feed

*: Foolscap refers to 8.5 13 short edge feed, 8.25 13 short edge feed, 8.12 13.25 short edge feed, and 8 13 short edge feed.

Available sizes in the primary (main) tray (Fold & Staple)

Standard: SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8K short edge feed

Custom: Widthwise 210 mm to 320 mm, Lengthwise 279 mm to 458 mm / Widthwise 8.27" to 12.60", Lengthwise 10.98" to 18.03"

Available sizes in the primary (main) tray (Half-Fold, Tri-Fold)

  • Half-Fold output

Standard: SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed, A4 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed, 8K short edge feed

Custom: Widthwise 210 mm to 320 mm, Lengthwise 279 mm to 458 mm / Widthwise 8.27" to 12.60", Lengthwise 10.98" to 18.03"

  • Tri-Fold output: A4 short edge feed, 8.5 11 short edge feed, 16K short edge feed

Available sizes in the primary (main) tray (straight output, offset output)

Standard: SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed/long edge feed, A4 short edge feed/long edge feed, B5 short edge feed/long edge feed, A5 long edge feed, 12 18 short edge feed, 11 17 short edge feed, 9 11 long edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed/long edge feed, 7.25 10.5 short edge feed/long edge feed, Foolscap*, 8K short edge feed, 16K short edge feed/long edge feed

Custom: Widthwise 182 mm to 320 mm, Lengthwise 148 mm to 458 mm / Widthwise 7.17" to 12.60", Lengthwise 5.83" to 18.03"

Tab paper: A4T long edge feed, 8.5 11T long edge feed

The following sizes are available only in straight output:

A5 short edge feed, B6 short edge feed, 5.5 8.5 short edge feed/long edge feed

*: Foolscap refers to 8.5 13 short edge feed, 8.25 13 short edge feed, 8.12 13.25 short edge feed, and 8 13 short edge feed.

Available sizes in the secondary (sub) tray

Standard: SRA3 short edge feed, A3 short edge feed, B4 short edge feed, SRA4 short edge feed/long edge feed, A4 short edge feed/long edge feed, B5 short edge feed/long edge feed, A5 short edge feed/long edge feed, B6 short edge feed, A6 short edge feed, 13 19 short edge feed, 12 18 short edge feed, 11 17 short edge feed, 9 11 long edge feed, 8.5 14 short edge feed, 8.5 11 short edge feed/long edge feed, 7.25 10.5 short edge feed/long edge feed, 5.5 8.5 short edge feed/long edge feed, Foolscap*, 8K short edge feed, 16K short edge feed/long edge feed

Custom: Widthwise 100 mm to 330 mm, Lengthwise 140 mm to 487 mm / Widthwise 3.94" to 12.99", Lengthwise 5.51" to 19.17"

Tab paper: A4T long edge feed, 8.5 11T long edge feed

*: Foolscap refers to 8.5 13 short edge feed, 8.25 13 short edge feed, 8.12 13.25 short edge feed, and 8 13 short edge feed.

Available weight in the primary (main) tray

Staple output, Fold & Staple output, Half-Fold output, Tri-Fold output: 60 g/m2 to 105 g/m2 / 15 lb Bond to 28 lb Bond

Straight output, offset output: 60 g/m2 to 350 g/m2 / 15 lb Bond to 93 lb Bond

Available weight in secondary (sub) tray

50 g/m2 to 350 g/m2 / 13 lb Bond to 93 lb Bond

Dimensions

424* mm (W) 656 mm (D) 990 mm (H) / 16.69" (W) 25.83" (D) 39" (H) (*: Excluding the primary (main) tray)

Width including the primary (main) tray (with the edge closed): 674.5 mm / 26.56"

Width including the primary (main) tray (with the edge pulled out): 790.5 mm / 31.12"

Weight

65 kg / 143.3 lb

Power source

Supplied from the equipment connected previously to the unit.

Maximum power consumption

80 W or less