SMB Settings

Configure an environment of usage for SMB (Server Message Block), such as Scan to SMB.

Menu Item/Description

Setting value (: Default)

Client Settings

The scanned original data can be sent to the shared folder. The settings described in this section are always required if you want to use Scan to SMB.

ON, OFF

SMB Authentication Setting *

NTLM v1, NTLM v2, NTLM v1/v2, Kerberos

Authentication Setting if Kerberos Fails

Enable NTLM v1/v2, Disable NTLM

DFS Setting

ON, OFF

Single Sign-On Setting

Default Domain Name

Up to 64 one-byte characters can be used.

User Authentication (NTLM)

ON, OFF

SMB Client Signature Setting

Invalid, Only When Required, Necessary

SMB Sever Settings

Use this machine as an SMB Server, and set the SMB Printing and SMB File Sharing.

ON, OFF

SMB Sever Common Settings

SMB Host Name

Up to 15 one-byte characters can be used.

Workgroup

WORKGROUP

Up to 15 one-byte characters can be used.

SMB Authentication Protocol

Enable SMB1.0, Disable SMB1.0

SMB Signature Setting

Invalid, Only When Required, Necessary

SMB Print Setting

ON, OFF

Print Service Name

Up to 12 one-byte characters can be used.

WINS/NetBIOS Settings

Set this item to use the WINS Server.

ON, OFF

Automatic Retrieval Settings

Enable, Disable

WINS Server Address 1

(0 to 255).(0 to 255).(0 to 255).(0 to 255) (Default: 0.0.0.0)

WINS Server Address 2

(0 to 255).(0 to 255).(0 to 255).(0 to 255) (Default: 0.0.0.0)

Node Type Setting

B Node, P Node, M Node, H Node

Direct Hosting Setting

Specify whether to use the Direct Hosting SMB Service.

ON, OFF

* If you use the Scan to SMB in Mac OS X 10.7 or later, set the SMB Authentication Method to NTLM v1/v2.