Tri-Fold Print
If Saddle Stitcher SD-513 is mounted, paper can be folded inside in three when printed. Then, you can select either inside or outside to have the printed image. The paper folded in three is output to the Multi tri-fold mode tray.
Output mode | Description | Illustration |
|---|---|---|
Multi 3-Fold + Outside Print | Folds paper in three with the print side facing outward. |
|
Multi 3-Fold + Inside Print | Folds paper in three with the print side facing inward. |
|
Reference
Check paper information before use. For details, refer to Equipment, Equipment, Capacity, and Saddle Stitcher SD-513 processing capacity.
Position the original.
supplementary explanationThe number of original sheets to be loaded is set to that for Multi Tri-Fold. For details about the number of sheets folded in Multi-Fold, refer to Saddle Stitcher SD-513.
Press the COPY tab to display the COPY screen.
Press Output Setting.
The Output Setting screen is displayed.
Press Multi 3-Fold.
The Multi Tri-Fold setting screen is displayed.
Press either Outside Print or Inside Print.
supplementary explanationWhen the saddle stitcher is equipped with Creaser Unit CR-101, Crease is available. For details, refer to Creasing Paper in Multi Tri-Fold.
supplementary explanationWhen the saddle stitcher is equipped with Trimmer Unit TU-503, 2-Side Slitting is available. For details, refer to 2-Side Slitting in Multi Tri-Fold..
Press OK.
supplementary explanationTo undo the setting, press Cancel.
supplementary explanationTo disable the function while keeping the current setting, press Function OFF.
This returns to the Output Setting screen.
Press OK on the Output Setting screen to return to the COPY screen.
An icon representing specified function is displayed under Output Setting on the COPY screen.
Select additional copy conditions, as desired.
Enter the desired print quantity using the keypad.
supplementary explanationThe number of copies that can be output to the Multi tri-fold mode tray varies depending on the number of sheets folded in Multi Tri-Fold. For details, refer to Capacity.
Press Start on the control panel.